Electrostatic Precipitators (ESP )
Electrostatic Precipitators (ESP ) Supplier
OUR PRODUCTS:
Electrostatic Precipitators (ESP ) :
An Electrostatic Precipitator (ESP) is an air-pollution control device used in industries to remove fine dust, smoke, and particulate matter from exhaust gases by using electrical charges. It works by charging particles electrically and then collecting them on oppositely charged metal plates, ensuring clean gas is released into the atmosphere.
Our types of Electrostatic Precipitators
Dry Electrostatic Precipitators
Designed to remove dry particulate matter, such as dust and ash, from industrial exhaust streams. They work by passing dirty gas between electrically charged plates and collecting the particles on those plates.
Wet Electrostatic Precipitators
Used for removing wet and sticky particles like oil, tar, or paint from gas streams. They operate similarly to dry ESPs but use moisture to help collect the particulate matter.
Plate Electrostatic Precipitators
These use a series of flat plates to collect particles. They are commonly used in power plants because they can handle large volumes of gas and high particulate concentrations.
ONE STEP SOLUTION FOR ALL YOUR ENVIROMENTAL NEED.
Electrostatic Precipitators (ESP ) :
- ESPs for Sinter Plant (Head end & Tail End)
- ESPs for Pellet Plant (Hood & Wind Exhaust)
- ESPs for 2 x 1000 TPD DRI WHRBs
- ESPs for 1 x 1000 TPD DRI WHRBs
- ESPs for 6 x 650 TPD DRI WHRBs
- ESPs for 2 x 650 TPD DRI WHRBs
- ESPs for 1 x 650 TPD DRI WHRBs
- ESPs for 2 x 500 TPD DRI Kilns
- ESPs for 2 x 350 TPD DRI WHRBs & 1 x 30MW CFBC Boiler
- ESPs for 2 x 250 TPH CFBC Boiler (Char & Coal)
- ESPs for 2 x 500 60TPH (100% Char Fired) AFBC Boiler
- 30+ ESPs for DRI Kiln WHRBs &Dolochar Fired Boilers
- 500+ ESP Retrofit Installations.
*Others Industry —
- Cement: Klin, Mills,Cooler;
- Iron & Steel: Sintering, Pelletization,Sponge Iron Kiln,Cast House,Stock House;
- Biomass Fired Boilers;
- Waste To Energy Plants;
- Pulp & Paper: Recovery Boiler, Lime Kiln;
- Non-Ferrous: Smelter, Converter;
- Oil & Gas: FCCU etc;
| Parameter | Data |
| Application | Power Plants – Boilers and Heaters, *Other Industries |
| Capacity (Power Plant MW) | 5 to 600 |
| Gas Temperatures(°c) | 70 – 400 |
| Gas Flow Rate(m3/s) | 5 – 1500 |
| ESP inlet dust loading (g/Nm3) | 0.2 – 250 g/Nm3 |
| Guaranteed ESP outlet emission (mg/Nm3) | 10 – 200 (suitable design for ESP as per – collector),filterable PM only |
| PM Collection Efficiency | Up to 99.95% |
| Availability | Up to 98% |